We are offering for your consideration, a toddler-sized vintage rocker or rocking chair with under-seat storage. The chair frame is made of wood that has been covered with red and white vinyl. We think it dates to the 1950's although it is not marked. The seat, arms and back are slightly padded. When the seat is lifted, the back tilts back at the same time and a small storage compartment is revealed. The compartment measures 12 1/4" wide x 14" front to back, x 5" deep. The hinge 'chain' is a string. The dimensions of the chair are: 18 1/4" tall x 19" wide x 16 3/4" front to back.This small child's rocking chair is pre-owned. There are some tacks missing on the back. There is some scattered staining and dirt. There is a 1" long slit in the vinyl on one arm (pictured).
We are offering for your consideration, this vintage 1950's chrome kitchen chair. It has red 'cracked ice' style vinyl covering the backrest and seat and chrome wrap-around arms and legs. The chair is not marked by the maker. The chair dimensions are: 29 1/4" tall x 20 1/2" wide x 22 1/2" deep.This vintage chair is pre-owned. There is one 3" slit in the vinyl on the seat. There are cracks and punctures in the vinyl on the back of the backrest. There are scuff marks and scattered surface rust on the legs.
$ 1,299.94 $ 1,499.95
We have for your consideration a pair of matching Niels Otto Moller Danish Modern ladder back chairs. Each is stamped on the seat frame 'JL Moller Model -- Made in Denmark Danish.' The model number on the frame is obscured but we believe it is model 82. We believe these were made in the 1960's and that the wood used is teak. We believe the seat fabric is original and is a neutral brown and woven coarse material, perhaps wool. Each chair measures 37 1/4" tall x 19 5/8" wide x 19 5/8" deep.
Niels Otto Moller founded JL Mollers Mobelfabrik in 1944. He produced designs and managed the production. The company is still active and family-owned.These difficult to find, Danish Modern, JL Moller marked chairs are pre-owned. We believe they are model 82. There are some scratches on the legs. These chairs were obtained at the estate sale of a collector of Danish Modern furniture.
We are pleased to offer a set of three (3) 1965 vintage black vinyl and walnut wood arm chairs. We have a partial tag that fell off one of the chairs that reads 'Paoli Chair Co. Paoli, Indiana 1965.' Each of the chairs is 28 7/8" tall x 26" wide x 26 1/2" deep. Each chair has a walnut frame with a cushioned vinyl back rest and seat. Each has vinyl-covered arm rests.This 1965 vintage Paoli chairs are pre-owned. Each of the chairs has minor damage to the vinyl including scuffs, tiny punctures, and stressed seams. The wood frames show minor wear. Overall the condition is excellent with elegant appearance.
We are offering for your consideration, a set of six (6) mate's dining chairs made by Ethan Allen. Each is marked 'Ethan Allen by Baumritter Made in Vermont #422.' The finish is #422. We believe they were made in 1962, and that they are the 10-6001 Mate's Chair although they are not marked. The dimensions of each chair are: 28 3/4" tall x 22 1/2" wide x 22" deep. From the floor to the top front center of the seat measures 17 1/4".These chairs are pre-owned but were well cared for and show light use. Overall condition is excellent. Each chair will be boxed and sent individually.
We are pleased to offer this Ajustrite brand industrial, steampunk, adjustable metal stool. This stool is dated to Feb 5, 1968 and was made by Ajusto Equipment in Bowling Green, Ohio. The seat rotates 360 degrees. It has four feet and a foot rail. The diameter of the seat top is 13". The height of the stool at its lowest is 19 1/2" tall and at its highest is 25 1/2" tall. Directions for raising and lowering the seat properly are located on the bottom of the seat (pictured) - its a little tricky but works well.This industrial stool is pre-owned and shows many scratches and scrapes in the applied color finish. There are also some paint splatters and one small weld mark on the seat top.
We have for your consideration a bentwood and metal vintage childs' chair marked 'American Seating Co. Grand Rapids Classmate.' The metal frame is painted blue and the seat and back are bentwood. Each chair is 22" tall x 12 1/4" wide x 12 3/4" deep.
We have a quantity of seven (7) chairs and this listing is for a single chair. The seat heights vary somewhat. 4 chairs have a floor to seat height of 12" while 3 chairs have a floor to seat height of 11".This vintage bentwood childs chair is pre-owned. There are scratches in the paint on the metal frames. The overall condition is excellent.
$ 499.94 $ 899.95
This is a gorgeous piece of Early American furniture. This is a bow-back windsor side chair. This piece came from the home of a serious 18th century antique collector, who had a beautiful collection of primitive furniture. The chair features bamboo-turned legs, stretchers and spindles. You can see plane marks on the bottom of the chair where it was hand carved. All of the spindles and the legs of the chair were connected using the through-tenon method.
The chair measures 35 11/16" in height. The height from the floor to the top of the seat is 15 1/8". The seat measures 15 1/2" wide by 15 1/2" deep.
This is in great condition overall with some small signs of age and use. The chair does have general spots of wear and surface scratches that I believe should be expected on a piece that is more than 150 years old. There is a chip next to one of the through-tenon joints at the top of the bow. There is a spot next to this chip where a repair was done - this repair may very well have been made during production, but we do not know for certain. We believe there is a possibility that this chair was painted, stripped and re-finished at some point, but we have no way of knowing for certain. There are remnants of what could be old paint in the tiny cracks and crevices of the chair. Please see pictures for more details.
We are pleased to offer this antique adjustable height metal physician's stool. It has a round seat that is 12 1/2" diameter. The height of the seat adjusts by spinning the seat, and the maximum height is 25 3/4" while the lowest height is 19". It has a footrest. It is unmarked by the maker. It has a great industrial or steampunk look.This antique, industrial adjustable height stool is pre-owned. There is a surface crack on two of the legs but they appear structurally sound (pictured). The paint shows chipping and wear.
This is a lovely antique solid wood side chair. We believe it is constructed out of quarter-sawn oak with a medium-tone "honey" colored finish. The seat frame has a trapezoidal shape with a slight serpentine front. It features a heavy leather seat with a quilted pattern. The seat is attached with decorative upholstery tacks. The 2 front legs of the chair have a simple cabriole shape with lovely Drake style (carved animal claw) feet. The back is rectangular with a solid central splat.
The chair has the following measurements:
We are pleased to offer this turned wood corner chair with rush seat. It is not marked by the maker. The finish is dark blue with aqua highlights although it is very dark and appears black unless inspecting closely. It is 28 5/8" tall x 16 3/4" x 16 3/4".This turned wood corner chair is pre-owned and the previous owner felt it was quite old. We do not know the exact age. It is structurally sound. There are rubbed and chipped areas in the paint.
$ 349.94 $ 449.95
This is an antique Victorian arm chair. It has a lovely, ornate, wooden frame with a dark wood stain. The upholstery is a burgundy or wine color, and has a velvety texture. The velvety portions feature a raised pattern that looks like leaves. It has a beautiful reflective quality, which changes slightly in appearance, depending on the angle of the viewer. The casters and sockets have been replaced with period-appropriate parts.
The chair has the following measurements:
This is in great condition overall with some general signs of age and use. There are some small spots of wear to the finish, as I believe should be expected. The upholstery has a few snags, but it is intact overall. There are a couple of small cracks on the corner of the headrest, but it is still structurally sound. There may be other small scratches or spots of wear, but I see nothing else of significance to report. Please see pictures for more details, and please ask questions if you have them.
We are pleased to offer this Daystrom chrome and vinyl tall stool with hairpin back brace or leg. The vinyl is blue. The dimensions of the stool are: 32 1/4" tall x 14 1/2" wide x 16 1/4" deep (front to back). From floor to the center front of the seat is 23 3/4". The seat back is stamped 'Daystrom'. The exact age of the stool is unknown.This Daystrom stool is pre-owned and has been used. There is a loss of stitching in the front between the piping and the seat top. The gap is about 2 1/2" long. Overall, the vinyl and chrome are in very good condition.
We are pleased to offer this vintage heavy vanity seat with custom made cushion. The elegant steel seat has winged lion figures on each side and flower shapes on the criss-cross sections on the legs. The dimensions are: 24" x 15" x 19" tall. The height to the center of the custom cushion is 17". There is some wear on the painted brass colored finish.
The colors in the cushion fabric are: golden-beige, pale blue, and ivory.
This heavy seat is pre-owned. The cushion is new and has been custom made to fit.
$ 1,999.94 $ 2,999.95
This is quite a rare find. These are antique pieces of furniture by Erik Bolin. Bolin was a French furniture designer in the early 20th century. He drew his inspiration for furniture design from a Normandy village, where he traveled with famous French writer, Anatole France. The furniture they saw there was at least 250 years old, and bore elements and lines which they had never before encountered. Bolin purchased as many pieces of furniture as the owners would allow, and carefully sketched the rest for his personal records.
He soon began designing furniture like that which he had seen in Normandy, and quickly found success in Paris. He went on to sell in Sweden and Los Angeles, inspiring his use of "PSLA" in his branding and logo. The Hollywood elite (and their designers) sought Erik Bolin's design expertise and furniture in their homes. It is widely known that both Spencer Tracy and Katherine Hepburn featured some of Bolin's work in their own homes. Hepburn even mentions Erik Bolin in her book, "Me" on page 398: "Trying to make it attractive was not really possible. In desperation, we had Erik Bolin - French furniture maker - make some wooden valances for the curtains."
This furniture set includes a low table and three chairs. These pieces were inherited from a famous pianist and socialite named Mildred "Honey" Titcomb (later Rains) from California. She was born in 1906 and was called "prodigy" on the piano by age 11. Her father was Henry Burgess Titcomb, president of the South Pacific Railroad.
This table and chair set was most likely designed and constructed early in the 20th century. It is highly possible that Mildred Titcomb requested this design specifically, but we have no way of knowing for certain. The set is heavily designed, with almost "chunky" and oversized lines. All of the pieces sit low to the ground. The table top has a rare special feature - there is a "bowl" carved into each corner. Each corner was found holding a small, flow blue plate. Thanks to some detective work by the team on the Flow Blue & Mulberry Followers Facebook page, I know that these Staffordshire England bowls are cut sponge and feature the "Rebecca" pattern. The plates alone are a very rare find. Unfortunately, one of the plates was broken many years ago. The three remaining plates will be included in the sale. We do not know if the table was made to hold these plates, or if they were originally meant for another purpose.
The table and chairs are composed of solid wood, though we do not know what type. They have a medium, honey-toned finish. Each piece is marked on the bottom "ERIK BOLIN P.S.L.A." The table measures 55" by 41" by 21 1/2" tall. The table top is 1 1/2" thick. The legs, which are partially turned out by design, measure 2 1/2" thick. Each chair measures 31 3/8" tall at the highest point. The seats are 24" wide by 19 1/2" deep, and sit 14 1/2" from the floor. Each chair has a cushion. We are not sure if these were a part of the original design, or something that was added later. We tend to believe they were added later, as it is not possible to sit at the table in the chairs when the cushions are in place (they make the seat too tall). With the cushions present, the chair seat height is 19 1/4".
These pieces show some significant signs of age and use, though we believe that much of this is "by design". Bolin was known for his love of Normandy furniture that was more than 250 years old, and he often replicated these designs. There are chips, rub marks, scratches, and splatters to the finish, as well as other similar "defects", which give these an antique charm. The table and chairs are all structurally sound. One of the table legs is a bit loose, but it is still firmly attached. One of the chairs sits unevenly, and rocks slightly. The chair cushions are all in great condition. Please see pictures for more details, and please ask questions if you have them.
**The final picture is an old polaroid that we found of the table in Mildred "Honey" Titcomb's home. You can see that the cushions have been re-upholstered at some point. You can also see Honey's Steinway grand piano in the background!
Honey was a true socialite, long before the names of Paris Hilton and Kim Kardashian plastered the pages of TMZ. Though she passed on before I was ever able to meet her in person, I had the opportunity to get to know Honey when we acquired some items from her estate in 2012. I now have the pleasure of sharing her story on our blog. You can read it here.
We are pleased to offer this Ethan Allen upholstered bench or stool. It might also be considered an ottoman. It is marked with an Ethan Allen tag with cleaning instructions. It features maple legs and a padded/cushioned top. The fabric is plaid that has burgundy, off-white, and salmon or rust with cording on the perimeter. The dimensions are: 19 1/4" tall x 19 1/2" wide x 16 1/2" deep.
This Ethan Allen bench or stool is pre-owned but shows little wear. Overall condition is excellent.
We are pleased to offer this Ethan Allen arm chair with navy blue upholstery and decorative brass tacks. The Ethan Allen tag with cleaning instructions and manufacturing label is present. It is labelled '20-7060.' The dimensions are: 43 1/4" tall x 25 1/2" wide x 26 1/2" deep.This Ethan Allen arm chair is pre-owned but is in excellent condition. The wood and upholstery show very little wear and use.
$ 449.93 $ 499.94
This is a fantastic retro-looking, Mid-Century Modern chair. It is marked Kroehler Classic Designs by Kroehler Manufacturing Co in Naperville, Illinois. It was manufactured in January of 1940.
The chair has the following dimensions:
The body of the chair is composed of cotton linter felt. It has polyurethane foam with polyester fibers. The chair has an exposed wood frame across the headrest, arms, and legs.
This is in great, vintage condition overall with some general signs of age and use. The upholstery has some fading and soiled spots. There are some small spots of wear to the piping. There is a small chip on one of the wooden arms. I see nothing else of significance to report. Please see pictures for more details, and please ask questions if you have them.
We are pleased to offer this LYON brand industrial metal stool. This stool is 23 1/2" tall x 15 1/4" x 15 1/2". The square seat portion measures 14" x 14". The seat is stamped on the edge 'Lyon Aurora, Ill. York, PA'. There is a foot rail on each of the four sides.This vintage metal industrial stool was painted blue years ago. There are dings, scratches and missing paint present. Structurally, it is in sound condition.
We are offering for your consideration this Mid Century Modern style child's chair. It has solid birds-eye maple legs and sides and a plywood seat. It measures 22 1/2" tall x 12" wide x 13 3/4" deep. The center of the seat is 13 1/2" from the floor. The seat does NOT fold up but is in a fixed position. This adorable chair is sturdy and well made. There is a metal pad on the bottom of each of the feet.This vintage child's chair is pre-owned and shows many scratches, most of which are on the seat. Most of the original varnished finish is gone.
We are pleased to offer this restored Mid Century Modern style wire furniture set. Included in this set are two chairs with arms, one chair without arms, and a footstool. The chair frames are heavy gauge metal 'wire' and the backs and seats are bent plywood. The footstool also has a heavy gauge metal 'wire' base and the top is wood covered with padding and fabric. The crinkle style upholstery fabric is black with red and blue 'atomic' style spheres.
Footstool dimensions: 15 3/4" tall x 18 1/4" x 15 1/4"
Chair with arms dimensions: 27 1/2" tall x 25 5/8" wide x 25" deep.
Chair without arms dimensions: 27 1/2" tall x 24 3/4" wide x 25" deep.This Mid Century Modern furniture set is pre-owned but has been restored. The metal frames have been repainted and new upholstery has been added to the seats, backs, and footstool top. The exact age and maker is unknown. These items will be shipped in two separate boxes.
We are offering for your consideration this new, Brassfield Originals, custom made live edge coffee table or sturdy bench. It is made of oak in a primitive/rustic style with finely tapered legs attached with mortice and tenon joinery. The coffee table or bench measures 16 1/2" tall x 34 1/8" wide x 18 5/8" deep.
$ 149.95This listing is for an antique, rounded back, wooden chair with rush or reed seat. It features turned spindles and a rounded back, similar to the Windsor style chair. It stands 37 1/2" tall from floor to tallest height of the back. It measures 17" from floor to the center of the seat in front. We believe the wood is walnut. The seat has been redone and is excellent condition. The seat has a crack on the bottom that was nicely repaired at some point in the past. It is quite sturdy. This pre-owned chair has wear consistant with an antique piece. It has not been marked by the maker.
We are pleased to offer this vintage bentwood and metal, swiveling, industrial chair with three-way adjustability. The seat back adjusts in and out as well as up and down. The chair seat can be adjusted up and down (the floor to the top of the seat at the highest adjustment is 21 1/2" and 15 1/4" at the lowest adjustment.) The back and the seat feature bent plywood while the frame is gray painted metal. The height of the chair to the top of the backrest is 36 5/8". The width is 16" x 16" depth.This vintage adjustable drafting chair is pre-owned. There is significant wear to the gray paint as well as scratches and dings on the bentwood. The seat back will be removed for shipping so some assembly will be required upon receipt.
$ 749.94 $ 899.95
This is a vintage triple seat chair, bench or couch by Eck-Adams Corp. It was made in 1980, but has a very Mid-Century Modern look and feel. It is probable that this piece graced the presence of an office waiting room for many years. It has a wood frame, which we believe to be a dark-stained oak, though are unable to say for certain. The upholsterly covering the seat and back cushions is a teal colored vinyl. The seat has the following measurements:
The individual seat cushions measure 21" by 20" deep.
This piece is in good condition overall with some general signs of age and use. There are surface scratches and spots of wear consistent with use, most notably on the ends of the arms. The vinyl appears to be in great condition overall, with no signs of age or use other than light surface soiling. Please see pictures for more details, and please ask questions if you have them.
We are pleased to offer this 1950s Willett Wildwood solid cherry, rope leg and gate leg, drop-leaf dining table with one leaf and seven chairs. Also included are the protective pads, which are felt on one side and vinyl on the other. The table has a paper tag on the bottom with the 'Consider H. Willett 655' mark. The table is 29 1/2" tall x 44" wide x 27 1/2" deep (without leaf). The leaf measures 15 1/8" wide.
There are seven (7) total, matching chairs. Each has a large flower on the back and a raised-chenille-style fabric seat. The colors within the boldly patterned print are navy blue, olive green, red and pink. Each chair is 34 3/4" tall x 18" wide x 20 1/2" deep.This Willett dining table with one leaf and seven chairs pre-owned. The overall condition is excellent. There are minor dings and scratches as would be expected with used, vintage furniture pieces. There is one small area of discoloration on one side of the table. The previous owner related that the table was always used with the pads in place.
We are pleased to offer this Winco brand model 6750 medical or geriatric recliner chair with a 450 pound maximum weight capacity. It has gray vinyl upholstery and black armrests. There is a fold-down tray on each side and a recliner adjusting bar on the back for caregiver assistance with positioning. The chair sits atop 4 heavy-duty casters, 3 of these have total lock capabilities and the left rear is the steering caster. The arms swing-out fully with just a step on the red tab on the side. This feature allows for close patient access in case of an emergency or for easier tranfer to wheel chair, etc. Dimensions of the chair in upright position with trays down and arms in standard position are: 49 1/2" tall x 37 3/4" wide x 40 1/4" deep. The seat width excluding arms is 28 1/4".This medical/geriatric chair is pre-owned. It was used in a dialysis unit and was replaced with a newer model. It is in excellent functioning condition. The exact age is unknown. There is some mild wear on the armrests and there are a few scratches on the painted finish in a few small spots. The stain-free vinyl upholstery is intact and clean.
We are pleased to offer this Winco brand model 6750 medical or geriatric recliner chair with a 450 pound maximum weight capacity. It has gray vinyl upholstery and black armrests. There is a fold-down tray on each side and a recliner adjusting bar on the back for caregiver assistance with positioning. The chair sits atop 4 heavy-duty casters, 3 of these have total lock capabilities and the left rear is the steering caster. The arms swing-out fully with just a step on the red tab on the side. This feature allows for close patient access in case of an emergency or for easier tranfer to wheel chair, etc. Dimensions of the chair in upright position with trays down and arms in standard position are: 49 1/2" tall x 37 3/4" wide x 40 1/4" deep. The seat width excluding arms is 28 1/4".This medical/geriatric chair is pre-owned. It was used in a dialysis unit and was replaced with a newer model. It is in excellent functioning condition. The exact age is unknown. There is some mild wear on the armrests and there are minor dings on the painted finish in a few small spots. The stain-free vinyl upholstery is intact except for a series of small slits on the back right edge.
$ 169.95We are pleased to offer this hand made bench, stool, or ottoman. It features a woven split wood seat and hand shaved and carved maple (we think) legs and rails. Each of the horizontal rails has a carved wood pin providing added stability. The seat measures 14" x 18 1/4". The woven split wood pieces are 1 3/8" wide, but we do not know what kind of wood it is. The stool is 18 1/2" tall. One of the legs is signed with the mark used by Joe & Alice Dudenhoeffer (makers of this piece) and dated 2004. This hand crafted bench is pre-owned but is in excellent condition.
It is very sturdy.